User manual

UserManualofNetworkCamera
25

Figure5‐2 TimeSettings
 SelecttheTimeZone.
SelecttheTimeZonewhichistheclosesttothelocationofthecamerafromthe
drop‐downmenu.
 SynchronizingTimebyNTPServer.
(1) CheckthecheckboxtoenabletheNTPfunction.
(2) Configurethefollowingsettings:
ServerAddress:IPaddressofNTPserver.
NTPPort:PortofNTPserver.
Interval: The time interval between the two synchronizing actions with NTP 
server.

Figure5‐3 TimeSyncbyNTPServer

Ifthecameraisconnectedtoapublicnetwork,youshoulduseaNTPserverthathasatime
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44).If the camera is set ina customized network, NTP software can be used to
establishaNTP
serverfortimesynchronization.
 SynchronizingTimeSynchronizationManually
EnabletheManualTimeSyncfunctionandthenclick
 tosetthesystemtime
fromthepop‐upcalendar.

YoucanalsochecktheSyncwithcomputertimecheckboxtosynchronizethetimeofthe
camerawiththatofyourcomputer.