User manual

UserManualofNetworkCamera
27

Figure5‐6 TCP /IPSettings
2. Configurethebasicnetworksettings,includingtheNICType,IPv4orIPv6Address,
IPv4orIPv6SubnetMask,IPv4orIPv6DefaultGateway,MTUsettingsand
MulticastAddress.

 ThevalidvaluerangeofMTUis500~1500.
 TheMulticastsendsastreamtothemulticastgroupaddressandallowsmultipleclients
toacquirethestreamatthesametimebyrequestingacopyfromthemulticastgroup
address.Beforeutilizingthisfunction,youhavetoenable
theMulticastfunctionofyour
router.
3. Click  tosavetheabovesettings.

Arebootisrequiredforthesettingstotak eeff ect.
5.3.2 ConfiguringPortSettings
Purpose:
YoucansettheportNo.ofthecamera,e.g.HTTPport,RTSPportandHTTPSport.
Steps:
1. EnterthePortSettingsinterface: