User manual

UserManualofNetworkCamera
28
Configuration>BasicConfiguration>Network>Port
OrConfiguration>AdvancedConfiguration>Network>Port

Figure5‐7 PortSettings
2. SettheHTTPport,RTSPportandHTTPSportofthecamera.
HTTPPort:Thedefaultportnumberis80,andcanbechangedtoanyportrange
1024to65535.
RTSPPort:Thedefaultportnumberis554.
HTTPS Port: The default port num ber  is 443, and can be changed to any port
range1024to65535.
SDKPort:ThedefaultSDKportnumberis8000.
3. Click  tosavethesettings.

Arebootisrequiredforthesettingstotak eeff ect. 
5.3.3 ConfiguringPPPoESettings
Steps:
1. EnterthePPPoESettingsinterface:
Configuration>AdvancedConfiguration>Network>PPPoE

Figure5‐8 PPP oESettings
2. ChecktheEnablePPPoEcheckboxtoenablethisfeature.
3. EnterUserName,Password,andConfirmpasswordforPPPoEaccess.