User manual

UserManualofNetworkCamera
29

TheUserNameandPasswordshouldbeassignedbyyourISP.
4. Click  tosaveandexittheinterface.

Arebootisrequiredforthesettingstotak eeff ect.
5.3.4 ConfiguringDDNSSettings
Purpose:
IfyourcameraissettousePPPoEasitsdefaultnetworkconnection,youcanusethe
DynamicDNS(DDNS)fornetworkaccess.
Beforeyoustart:
RegistrationontheDDNSserverisrequiredbeforeconfiguringtheDDNSsettingsof
thecamera.
Steps:
1. EntertheDDNSSettingsinterface:
Configuration>AdvancedConfiguration>Network>DDNS

Figure5‐9 DDNSSettings
2. ChecktheEnableDDNScheckboxtoenablethisfeature.
3. SelectDDNSType.ThreeDDNStypesareselectable:HiDDNS,IPServerand
DynDNS.
 DynDNS:
Steps:
(1) EnterServerAddressofDynDNS(e.g.members.dyndns.org).
(2) IntheDomaintextfield,enterthedomainnameobtainedfromtheDynDNS
website.
(3) EnterthePortofDynDNSserver.
(4) EntertheUserNameandPasswordregisteredontheDynDNSwebsite.
(5) Click  tosavethesettings.