User manual

UserManualofNetworkCamera
33
5.3.6 Configuring802.1XSettings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the
feature is enabled, the camera data is secured and user authentication is needed
whenconnectingthecameratothenetworkprotectedbytheIEEE802.1X.
Beforeyoustart:
Theauthenticationservermustbeconfigured.Pleaseapplyandregisterausername
andpasswordfor802.1Xintheserver.
Steps:
1. Enterthe802.1XSettingsinterface:
Configuration>AdvancedConfiguration>Network>802.1X

Figure5‐14 802.1XSettings
2. ChecktheEnableIEEE802.1Xcheckboxtoenablethefeature.
3. Configure the 802.1X settings, including EAPOL version, user name and
password.

TheEAPOLversionmustbeidenticalwiththatoftherouterortheswitch.
4. Entertheusernameandpasswordtoaccesstheserver.
5. Click  tofinishthesettings.

Arebootisrequiredforthesettingstotak eeff ect. 
5.3.7 ConfiguringQoSSettings
Purpose:
QoS(QualityofService)canhelpsolvethenetworkdelayandnetworkcongestionby
configuringthepriorityofdatasending.
Steps: