User manual

UserManualofNetworkCamera
37
1. EntertheVideoSettingsinterface:
Configuration>BasicConfiguration>Video/Audio>Video
OrConfiguration>AdvancedConfiguration>Video/Audio>Video
Figure519 ConfigureVideoSettings
2. Select the Stream Type of the camera to main stream (normal), substream or
thirdstream.
The main stream is usually for recording and live viewing with good bandwidth,
and the substream and third stream can be used for live viewing when the
bandwidthislimited.
3. You can customize the following parameters for the selected main stream or
substream:
VideoType:
Selectthestreamtypetovideostream, orvideo&audiocompositestream.The
audiosignalwillberecordedonlywhentheVideoTypeisVideo&Audio.
Resolution:

Selecttheresolutionofthevideooutput.
BitrateType:
Selectthebitratetypetoconstantorvariable.
VideoQuality:
WhenbitratetypeisselectedasVariable,6levelsofvideoqualityareselectable.
FrameRate:
Settheframerateto1/16~25fps.Theframerateistodescribethefrequency
at
whichthe videostreamisupdatedanditismeasuredbyframespersecond(fps).
Ahigherframerateisadvantageouswhenthereismovementinthevideostream,
asitmaintainsimagequalitythroughout.
Max.Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the
highervideoquality,butthehigherbandwidthisrequired.
VideoEncoding:
When the Stream Type of the camera is main stream, the Video Encoding