User manual

UserManualofNetworkCamera
38
standardcanbesettoH.264.
WhentheStreamTypeofthecameraissub‐stream,theVideoEncodingstandard
canbesettoH.264,MJPEG.
IFrameInterval:
SettheI‐Frameintervalto1~400.
4. Click  tosavethesettings.
5.4.2 ConfiguringAudioSettings
Steps:
1. EntertheAudioSettingsinterface
Configuration>BasicConfiguration>Video/Audio>Audio
OrConfiguration>AdvancedConfiguration>Video/Audio>Audio

Figure5‐20 AudioSettings
2. Configurethefollowingsettings.
AudioEncoding:G.711ulaw,G.711alawandG.726areselectable.
AudioInput:MicInandLineinareselectablefortheconnectedmicrophoneand
pickuprespectively.
3. Click
 tosavethesettings.
5.5 ConfiguringImageParameters
5.5.1 ConfiguringDisplaySettings
Purpose:
You can set the image quality of the camera, including brightness, contrast,
saturation,hue,sharpness,etc.

TheDisplayparametersvarydependingonthecameramodel. 
Steps:
1. EntertheDisplaySettingsinterface: