User manual

UserManualofNetworkCamera
47

Totriggeranalarmoutputwhenaneve ntoccurs,pleaserefertoSection5.6.4to
settherelatedparameters.
5.6.2 ConfiguringTamper‐proofAlarm
Purpose:
Youcanconfigurethecameratotriggerthealarmwhenthelensiscoveredandtake
alarmresponseaction.
Steps:
1. EntertheTamper‐proofSettingsinterface:
Configuration>AdvancedConfiguration>Events>Tamper‐proof

Figure5‐31 Tamper‐proofAlarm
2. CheckEnableTamper‐proofcheckboxtoenablethetamper‐proofdetection.
3. Set the tamper‐proof area; refer to Step 1 Set the Motion Detection Area in
Section5.6.1.
4. Click  to edit the arming schedule for tamper‐proof. The arming
scheduleconfigurationisthesameasthesettingofthearmingscheduleformotion
detection.RefertoStep2SettheArming ScheduleforMotionDetectioninSection