User manual

UserManualofNetworkCamera
48
5.6.1.
5. Check the checkbox to select the linkage method taken for the tamper‐proof.
Audiblewarning,notifysurveillancecenter,sendemailandtriggeralarmoutputare
selectable. Please refer to Step 3 Set the Alarm Actions for Motion Detection in
Section5.6.1.
6. Click  tosavethesettings.
5.6.3 ConfiguringExternalAlarmInput
Steps:
1. EntertheAlarmInputSettingsinterface:
Configuration>AdvancedConfiguration>Events>AlarmInput:
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(NormallyOpen)andNC(NormallyClosed).Editthenametosetanameforthe
alarminput(optional).

Figure5‐32 AlarmInputSettings
3. Click  tosetthearmingscheduleforthealarminput.RefertoStep2
SettheArmingScheduleforMotionDetectioninSection5.6.1.
4. Checkthecheckboxtoselectthelinkagemethodtak enforthealarminput.Refer