User manual

UserManualofNetworkCamera
52
Sender’sAddress:Theemailaddressofthesender.
SMTPServer:TheSMTPServerIPaddressorhostname(e.g.,
smtp.263xmail.com).
SMTPPort:TheSMTPport.ThedefaultTCP /IPportforSMTPis25(notsecured).
AndtheSSLSMTPportis465.
EnableSSL:CheckthecheckboxtoenableSSLifitisrequiredbytheSMTP
server.
AttachedImage:CheckthecheckboxofAttachedImageifyouwanttosend
emailswithattachedalarmimages.
Interval:Theintervalreferstothetimebetweentwoactionsofsendingattached
pictures.
Authentication(optional):Ifyouremailserverrequiresauthentication,check
thischeckboxtouseauthenticationtologintothisserverandenterthelogin
userNameandpassword.
ChooseReceiver:Selectthereceivertowhichtheemailissent.Upto2receivers
canbeconfigured.
Receiver:Thenameoftheusertobenotified.
Receiver’sAddress:Theemailaddressofusertobenotified.
4. Click  tosavethesettings.
5.6.7 ConfiguringSnapshotSettings
Purpose:
You can configure the scheduled snapshot and event‐triggered snapshot. The
captured picture can be stored in the SD card (if supported) or the netHDD (For
detailed information about netHDD, please refer to Section 6.1 Configuring NAS
Settings).YoucanalsouploadthecapturedpicturestoaFTPser ver.
BasicSettings
Steps:
1. EntertheSnapshotSettingsinterface:
Configuration>AdvancedConfiguration>Events>Snapshot
2. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
Check the Enable Event‐triggered Snapshot checkbox to check event‐triggered
snapshot.
3. Selectthequalityofthesnapshot.
4. Setthetimeintervalbetweentwosnapshots.
5. Click  tosavethesettings.

UploadingtoFTP
YoucanfollowbelowconfigurationinstructionstouploadthesnapshotstoFTP.
 UploadcontinuoussnapshotstoFTP
Steps: