User manual

UserManualofNetworkCamera
54
Chapter6 StorageSettings
Beforeyoustart:
Toconfigurerecordsettings,pleasemakesurethatyouhavethenetworkstorage
devicewithinthenetworkortheSDcardinsertedinyourcamera.
6.1 ConfiguringNASSettings
Beforeyoustart:
Thenetworkdiskshouldbeavailablewithinthenetworkandproperlyconfiguredto
storetherecordedfiles,logfiles,etc.
Steps:
1. Addthenetworkdisk
(1) EntertheNAS(Network‐AttachedStorage)Settingsinterface:
Configuration>AdvancedConfiguration>Storage>NAS

Figure6‐1 AddNetworkDisk
(2) EntertheIPaddressofthenetworkdisk,andenterthedefaultfile.

PleaserefertotheUserManualofNASforcreatingthefilepath.
(3) Click  toaddthenetworkdisk.

Afterhavingsavedsuccessfully,youneedtorebootthecameratoactivatethesettings.
2. Initializetheaddednetworkdisk.
(1) Enter the HDD Settings interface (Advanced Configuration > Storage >
StorageManagement),inwhichyoucanviewthecapacity,freespace,status,