User manual

UserManualofNetworkCamera
56

Figure6‐5 RecordingScheduleInterface
2. CheckthecheckboxofEnableRecordScheduletoenablescheduledrecording.
3. Settherecordparametersofthecamera.

Figure6‐6 RecordParameters
 Pre‐record:Thetimeyousettostartrecordingbeforethescheduledtimeor
the event. For example, if an alarm triggers recording at 10:00, and the 
pre‐recordtimeissetas5seconds,thecamerastartstorecordat9:59:55.
ThePre‐
recordtimecanbeconfiguredasNoPre‐record,5s,10s,15s,20s,
25s,30sornotlimited.
 Post‐record: The time you set to stop recording after the scheduled time or
theevent.Forexample,ifanalarmtriggeredrecordingendsat11:00,
andthe
post‐recordtimeissetas5seconds,thecamerarecordsuntil11:00:05.
ThePost‐recordtime canbeconfiguredas5s,10s,30s,1min,2min,5min
or10min.

Therecordparameterconfigurationsvarydependingonthecameramodel.
4. Click  toedittherecordschedule.