User manual

UserManualofNetworkCamera
57

Figure6‐7 RecordSchedule
5. Choosethedaytosettherecordschedule.
(1) Setall‐dayrecordorsegmentrecord:
 If you want to configure the all‐day recording, please check the All Day
checkbox.
 If you want to record in different time sections, check the Customize
checkbox.SettheStartTimeandEndTime.

The time of each segment can’t be overlapped. Up to 4 segments can be
configured.
(2) SelectaRecordType.TherecordtypecanbeNormal,MotionDetection,
Alarm,Motion|Alarm,Motion&Alarm,PIRAlarm,WirelessAlarm,
EmergencyAlarm,orMotion|AlarmInput|PIR|Wireless|Emergency.
 Normal
If you selectNormal, the video willbe recorded automatically accordingto
thetimeoftheschedule.
 RecordTriggeredbyMotionDetection
IfyouselectMotionDetection,thevideowillberecordedwhenthemotion
isdetected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Step 1 Set the Motion Detection Area in the Section
5.6.1.
 RecordTriggeredbyAlarm