User manual

UserManualofNetworkCamera
68
1. EntertheMaintenanceinterface:
Configuration>BasicConfiguration>System>Maintenance
OrConfiguration>AdvancedConfiguration>System>Maintenance
2. Click  or  torestorethedefaultsettings.

Figure9‐12 RestoreDefaultSettings

Afterrestoringthedefaultsettings,theIPaddressis alsorestoredtothedefaultIP
address,pleasebecarefulforthisaction.
9.6.3 Exporting/ImportingConfigurationFile
Steps:
EntertheMaintenanceinterface:
Configuration>BasicConfiguration>System>Maintenance
OrConfiguration>AdvancedConfiguration>System>Maintenance
1. Click  tosavetheconfigurationfi leofthecurrentdevice.
2. Click  to select the saved configuration file and then click
 tostartimportingconfigurationfile.

Youneedtorebootthecameraafterimportingconfigurationfile.
9.6.4 UpgradingtheSystem
Steps:
1. EntertheMaintenanceinterface:
Configuration>BasicConfiguration>System>Maintenance
OrConfiguration>AdvancedConfiguration>System>Maintenance
2. Click  tosele ctthelocalupgradefileandthenclick  to
startremoteupgrade.

The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the