User manual

UserManualofNetworkCamera
73
portsofanothercameraas81,8001,555,8201withIP192.168.1.24.Refertothe
stepsasbelow:

The8200por tchangeswiththe8000portwithaconstantvalueof200.E.g.ifthe 8000
portischangedto8005,thenthe8200portshouldbechangedto8205.
Steps:
1. Asthe settings mentionedabove, mapthe port 80, 8000, 554 and 8200for the
networkcameraat192.168.1.23
2. Maptheport81,8001,555and8201forthenetworkcameraat192.168.1.24.
3. EnableALLorTCPprotocols.
4. ChecktheEnablecheckboxandclick
.

FigureA.2.3PortMapping


The port of the network camera cannot conflict with other ports. For example, some web
management port of the router is 80. Change the camera port if it is the same as the
managementport.
