User manual

User Manual of Network Camera
31
Figure 5-6 Setting a Patrol
2. Select a patrol number from the drop-down list.
3. Click the icon in the lower-left corner to open the patrol parameters page.
Figure 5-7 Patrol Parameters
4. Set the preset from the drop-down list as the key points of patrol, and set the
duration time and scanning speed.
5. Click OK to save the settings.
6. Repeat the Steps 3~5 to configure other key points for the patrol.
7. Click the icon to save the patrol settings.
 Calling a Patrol:
This feature enables the camera to repeat the scanning track specified by the key
points of the pre-defined patrol.
In the PTZ control panel, select a defined patrol from the list and click to call the