User manual

User Manual of Network Camera
43
Figure 6-14 SNMP Settings
2. Check the corresponding version checkbox of Enable SNMPv1, Enable SNMP
v2c or Enable SNMPv3 to enable the feature.
3. Configure the SNMP settings.
Note: The settings of the SNMP software should be the same as the settings you
configure here.
4. Click Save to save and finish the settings.
Note: A reboot is required for the settings to take effect.
6.3.6 Configuring 802.1X Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature