User manual

User Manual of Network Camera

detected and certain actions may be triggered by the detection.

Steps:

1. Enter the face detection settings interface:

Configuration > Advanced Configuration > Events > Face Detection

Figure 6-44 Face Detection Settings

2. Check the checkbox of Enable Face Detection to enable the function.

3. (Optional)You can check the Enable Dynamic Analysis for Face Detection

checkbox if you want the face detected get marked with rectangle in the live

view.

Note: Select disable the rules from Configuration-Local Configuration-Live

View Parameters-Rules if you don’t want the detected face marked with the

green frame.

4. Configure the sensitivity [1~5] of the face detection.

5. Click Edit to edit the arming schedule for face detection. The arming schedule

configuration is the same as the setting of the arming schedule for motion

detection. Refer to Task 2 Set the Arming Schedule for Motion Detection in

Section 5.6.1.

6. Check the checkbox to select the linkage method taken for the face detection.

Please refer to Task 3 Set the Alarm Actions for Motion Detection in Section

5.6.1.

6.6.7 Configuring Audio Exception Detection

Purpose:

Audio exception detection detects the audio input exception.

Steps: