User manual

User Manual of Network Camera
74
1. Enter the Audio Exception Detection interface.
Configuration > Advanced Configuration > Events > Audio Exception Detection
Figure 6-45 Audio Exception Detection Settings
2. Audio Input Exception: Check the checkbox to enable the function so as to
detect the abnormal audio input.
Sudden Change of Sound Intensity: It detects the sudden change of the sound
intensity, and it is consist of the following two settings.
 Sensitivity: Range [1-100], the smaller the value is, the more severe the change
should be to trigger the detection.
 Sound Intensity Threshold: Range [1-100], it can filter the sound in the
environment, the louder the environment sound, the higher the value should be.
You can adjust it according to the real environment.
3. Click Edit to edit the arming schedule for audio exception detection. The arming
schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Task 2 Set the Arming Schedule for Motion Detection
in Section 5.6.1.
4. Check the checkbox to select the linkage method taken for the audio exception.
Please refer to Task 3 Set the Alarm Actions for Motion Detection in Section
5.6.1.