User manual

User Manual of Network Camera
79
2. Configure the sensitivity of scene change detection.
Sensitivity: Range [1-100]. The higher the sensitivity, the easier the change of
scene can trigger the alarm.
3. Click Edit to edit the arming schedule for scene change detection. The arming
schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Task 2 Set the Arming Schedule for Motion Detection
in Section 5.6.1.
4. Check the checkbox to select the linkage method taken for scene change detection.
Please refer to Task 3 Set the Alarm Actions for Motion Detection in Section
5.6.1.
Figure 6-49 Scene Change Detection Settings