User manual

User Manual of Network Camera
83
25 s, 30 s or not limited.
 Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.
 Overwrite: Select Yes, and then the record files will be overwritten when the
HDD becomes full. Otherwise, the recording will stop when the HDD
becomes full.
 Recording Stream: Main stream, Sub Stream and Third Stream are selectable
for recording. When you select sub-stream, you can record for a longer time
with the same storage space.
Note: The record parameter configurations vary depending on the camera model.
4. Click Edit to edit the record schedule.
Figure 7-6 Record Schedule
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:
 If you want to configure the all-day recording, please check the All Day
checkbox.
 If you want to record in different time sections, check the Customize