Programming Instructions

ROLLEASE ACMEDA Automate
™
Programming Instructions | Li-ion Tubular Motors | 3
CONTENTS
1 ASSEMBLY 4
2 RETROFIT INSTALLATION 5
3 CHARGING 5
4 P1 BUTTON FUNCTIONS 6
4.1 Motor state test 6
4.2 Motor configuration options 6
5 INITIAL SET UP 7
5.1 Pair motor with controller 7
5.2 Check motor direction 7
5.3 Set Limits 8
6 ADJUSTING LIMITS 9
6.1 Adjust upper limit 9
6.2 Adjust lower limit 9
7 CONTROLLERS AND CHANNELS 10
7.1 Using P2 Button on existing controller to add a
new controller or channel 10
7.2 Using a pre-existing controller to add or delete
a controller or channel 10
8 FAVORITE POSITIONING 11
8.1 Set a favorite position 11
8.2 Send shade to favorite position 11
8.3 Delete favorite position 11
9 TILT & ROLLER MODE 12
9.1 Toggle motor to Tilt Mode 12
9.2 Toggle Motor to Roller Mode 12
10 ADJUSTING SPEED 13
10.1 Increase Motor Speed 13
10.2 Decrease Motor Speed 13
11 SOFT STOP CONFIGURATION 14
11.1 Turn Soft Stop OFF 14
11.2 Turn Soft Stop ON 14
12 BATTERY CHECK FUNCTION 15
12.1 Send Shade to battery charge level 15
13 CHARGING LED 15
13.1 Turn Charging LED ON/OFF 15
14 SLEEP MODE 16
15 TROUBLE SHOOTING 16