Programming Instructions

2 | Automate™ Programming Instructions | Cord Lift Motor with Extended P1 Button Cable ROLLEASE ACMEDA
CONTENTS
1 P1 BUTTON FUNCTIONS 4
1.1 Motor State Test 4
1.2 Motor Configuration Options 4
2 INITIAL SETUP 5
2.1 Pair Motor with controller 5
2.2 Check motor direction 5
2.3 Set limits 6
3 ADJUSTING LIMITS 7
3.1 Adjust upper limit 7
3.2 Adjust lower limit 7
4 ADDING OR REMOVING CONTROLLERS AND CHANNELS 8
4.1 Using motor P1 button 8
4.2 Using a pre-existing controller 8
5 FAVORITE POSITIONING 9
5.1 Set favorite position 9
5.2 Send shade to favorite position 9
5.3 Delete favorite position 9
6 ADJUSTING MOTOR SPEED 10
6.1 Increase or decrease motor speed 10
7 TILT & ROLLER MODE 11
7.1 Enter tilt mode 11
7.2 Enter roller mode (Default) 11
8 SLEEP MODE 12
8.1 Enter sleep mode 12
8.2 Exit sleep mode 12
9 SOFT STOP ON/OFF 13
9.1 SOFT STOP ON 13
9.2 SOFT STOP OFF 13
10 BATTERY CHECK FUNCTION 14
10.1 Send Shade to battery charge level 14
11 TROUBLESHOOTING 15