User Instructions

ManualsBrandsRollease Acmeda ManualsElectronicsARC Motion Sensor

AUTOMATE

™

ARC Motion Sensor Instructions

433 MHZ

BI-DIRECTIONAL

FEATURES:

• Compatible with AUTOMATE awning motors and controllers

• Suitable for fitting to awning terminal bars

• Provides protection from excessive wind gusts

• 9 x levels of sensitivity

• Low battery warning

The ARC Motion Sensor is used to detect motion on a shade. The result of strong vibration

can trigger a paired awning motor to move the shade to its home position for protection.

The motion sensor can only be programmed to operate External Motors (15Nm and

upwards).

MT02-0301-xxx002_PRGM_v3.2_JUNE 2021

Summary of content (8 pages)

PAGE 1
AUTOMATE ™ ARC Motion Sensor Instructions 433 MHZ BI-DIRECTIONAL The ARC Motion Sensor is used to detect motion on a shade. The result of strong vibration can trigger a paired awning motor to move the shade to its home position for protection. The motion sensor can only be programmed to operate External Motors (15Nm and upwards). MT02-0301-xxx002_PRGM_v3.
PAGE 2
CONTENTS 1 SAFETY INSTRUCTIONS 3 2 OVERVIEW 4 2.1 Dimensions 4 2.2 Cover Removal 4 2.3 P2 Button & Sensitivity Dial 5 2.4 Sensitivity Dial Adjustment 5 3 6 FUNCTION 3.1 Sensitivity Dial / P2 Operation 6 3.2 Pairing to Motion Sensor ITEM 3.3 NO. Use Sensor as Remote DESCRIPTION 1 3.4 2 33.
PAGE 3
1 SAFETY INSTRUCTIONS WARNING: Important safety instructions to be read before installation and use. Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty. It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference. • Do not expose to water, moisture, humid and damp environments or extreme temperatures.
PAGE 4
2 1 2.1 OVERVIEW STATIC TITLE REV. DESCRIPTION DRAWN DATE DIMENSIONS 1.60in 41mm 5.91in 150mm 1 1.01in 26mm 4 1.22in 31mm 3 4.21in 107mm 0.31in 8mm 0.18in 4.60mm 2 0.63in 16mm 8 4.53in 115mm 2.2 0.54in 13.60mm COVER REMOVAL C www.rolleaseacmeda.com 4 | Automate™ Programming Instructions | Motion Sensor ROLLEASE ACMEDA SCALE:1:1 DRAWN: 17 Jul 2018 PROPRIETARY & CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ROLLEASE ACMEDA.
PAGE 5
P2 BUTTON & SENSITIVITY DIAL 0 1 7 8 0 1 5 6 4 5 6 Sensitivity dial 9 2 3 P2 2 3 7 8 9 4 2.3 Motion Sensor Cradle 2.
PAGE 6
3 1 FUNCTION STATIC TITLE 3.1 • • • • SENSITIVITY DIAL / P2 OPERATION Dial Set to 0: Sensor is in pairing mode. Dial Set to 1-9: In Active mode, sensitivity, Highest - Lowest. Dial set to 5: Move motor to upper limit/Motion Sensor in Active mode. Dial set to 9: Move motor to bottom limit/ Motion Sensor in Inactive mode. When battery voltage is lower than 2.3 V, it beeps every 5 seconds. Adjust sensitivity accordingly. The detected vibration range is 3G. (1G = 9.
PAGE 7
USE SENSOR AS REMOTE Dial Setting Press P2 Response 0 1 7 8 9 2 3 7 8 0 1 4 5 6 5 6 To move shade to bottom limit, set dial to 9 and press P2. Dial Setting Once confirmed Sensor and Motor are talking together, set sensitivity. Dial Setting Press P2 7 8 5 6 04 1 2 5 6 10 21 09 4 2 3 3 87 98 0 1 2 3 8 37 4 9 28 39 54 65 67 Dial set to 1-9: Seneitivity, Highest - Lowest.
PAGE 8
4 1 TROUBLE STATIC TITLE SHOOTING Problem Cause Remedy Sensor does not work Battery is discharged Replace battery Battery is inserted incorrectly Check battery polarity Radio interference / Shielding Ensures sensor is positioned away from metal objects and that aerial on motor is kept straight and away from metal Receiver distance is too far from transmitter Move sensor to a closer position Power failure Check power supply to motor is connected and active Incorrect wiring Check wiring is co