Programming Instructions
8 | Automate Programming Instructions | AC Tubular Motors ROLLEASE ACMEDA
4 INTIAL SETUP
4.1 Pair motor with controller
4.2 Check motor direction
To check travel direction of shade, press UP
or DOWN on controller.
To reverse shade direction, hold both UP and
DOWN.
Until the motor responds.
Quick Press = Step
Long Press = Continuous Travel
Motor Response
IMPORANT
Damage to shade may occur when operating motor prior to
setting limits. Attention should be given.
IMPORTANT
Reversing motor direction using this method is only possible
during initial set-up.
Select channel on
controller.
Hold P1 button on motor
head.
Hold STOP on controller.
IMPORTANT Motor Response Motor Response
Consult user manual for your
controller for information on
selecting channel.
Motor is now in step mode and ready for setting limits