Programming Instructions

6 | Automate Programming Instructions | Tubular Li-ion Motors ROLLEASE ACMEDA
2 WIRING
2.1 Charging options
This motor has a 12V built in Li-ion battery pack with integrated charge management.
Max power input for recharging: 12.6V / 1000mAh.
• Before first use please charge motor for 6 hours. Using the reccomended AC charger.
• During operation, if voltage drops to less than 10V, the motor will beep 10 times to prompt it needs to be
charged.
• Motor will stop running when the voltage is lower than 7V and it will resume again when the voltage is
greater than 7.5V.
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
AC Charger
ITEM NO.:
# MTDCB-CHARGE-US
# MTDCB-CHARGE-AU
# MTDCB-CHARGE-EU
ITEM NO.:
#MTSOLPAN-B
Solar Panel