Programming Instructions

ROLLEASE ACMEDA Automate Programming Instructions | Paradigm Remotes | 11
7 TROUBLESHOOTING
Problem Cause Remedy
Remote battery is discharged Replace battery
Motor is not responding
Battery is inserted incorrectly Check battery polarity
Radio interference / Shielding
Ensure remote is positioned away
from metal objects and that aerial on
motor or reciever is kept straight and
away from metal.
Receiver distance is too far
from remote
Move remote to a closer position
Power failure
Check power supply to motor is
connected and active
Incorrect wiring
Check wiring is connected correctly
(refer to motor installation
instructions)
Cannot set limits on a single
motor (multiple motors
respond)
Using “Group” channels to
adjust motor limits
Always reserve an individual channel
for programming functions.
SYSTEM BEST PRACTICE - Provide
an extra 15 channel remote in your
multi motor projects, that provides
individual control for each motor for
programming purposes.