Programming Instructions

8 | Automate Programming Instructions | Paradigm Remotes ROLLEASE ACMEDA
5 PROGRAMMING
5.1 Protocol selection
IMPORTANT
Please refer to the the relevant documentation of your motor model for instructions on adjusting motor settings.
This device can be configured to operate Acmeda line “EL” motors. (The default mode is ARC protocol).
To toggle between ARC & EL modes follow the following steps.
HOLD P2 whilst inserting battery
For 15 CH For 1 CH
Screen flashes X 5
Screen flashes “1” = ARC Mode
Screen flashes “2” = EL Mode
1 Flash = ARC Mode
2 Flashes = EL Mode