Programming Instructions

ROLLEASE ACMEDA Automate Programming Instructions | Paradigm Remotes | 9
5.2 Hide unused channels
5.3 Disable limit setting function of remote
Your multi channel remote can be configured to have anywhere between 1 or 15 visible channels.
Inactive channels will not be visible when scrolling through the CH selection.
Hold STOP
and CH
Continue holding CH and
select required channel qty
by pressing UP or DOWN
Press STOP to confirm
Response Response
Channel 15 flashes Flashing stops
IMPORTANT
This mode is intended to be used after all shade programming is completed.
User Mode will prevent accidental or unintended changing of limits.
To switch modes hold
right button for 5
Seconds
15 CH 1 CH
Pressing the right button for 1 second or less will display the current mode
Response Response
LCD displays “L” when locked
LCD displays “U” when unlocked
LED solid on when locked
LED blinking when unlocked
It is still possible to add or delete channels and perform P2 functions, while the lock function is enabled.