Operating Instructions

32
LOADING FILM
Loading fi lm
›
Open the camera back (27) by pulling up the
rewind crank (12). As the camera back swings
open, the frame counter (6) will automatically
reset to „S“.
›
Insert the fi lm cartridge into the empty cartridge
compartment with the fi lm leader facing the
take-up spool.
›
Press the rewind crank down into its seat.
›
Pull out a suffi cient length of fi lm and thread it
into the slot of the take-up spool.
›
Stroke the wind lever and press the shutter
release until the sprocket wheel engages the fi lm
perforation on both sides.
›
Close the camera back so that it snaps shut.
›
Wind the fi lm and press the shutter release
repeatedly until the frame counter reads 1,
watching the rewind shaft. This should turn
during the process, indicating that the fi lm is
being wound.