Operating Instructions

SETTING THE SHUTTER SPEED

Setting the shutter speed

›

Turn the shutter-speed dial (2) until the shutter-

speed index is opposite the desired speed. The

dial must be in one of its click-stop positions.

Intermediate settings cannot be used!

›

For fast-moving subjects or when using high-

speed film, it is advisable to select a fast

shutter speed.

›

To activate the metering system, slightly depress

the shutter release (4). Turn the aperture ring

until the light balance in the viewﬁ nder reads

•

If <+ is displayed, there is a risk of overexposure.

In this case, turn the aperture ring towards a

smaller aperture. Conversely, -> is a warning

against underexposure, and you should turn the

aperture ring towards a wider aperture.

›

If your shutter speed drops to less than about

1/30 s, screw a cable release into the socket of

the shutter release (4) and use a tripod.