Practical Use Manual

Unloading the Film
After the last picture (depending on the film length
frame 36, 20 or 12) the film has to be rewound:
Turn the lever (1) upwards.
Unfold the crank (2) and turn in the direction of
the arrow until the resistance of pulling the film
disappears.
Fold up the crank again and turn down the lever (1)
.
Unlock and remove the camera back, take out the
cartridge and preferably repack it lighttight in its
original packing. Get colour films processed as soon
as possible.
Never change film in direct sunlight! Utilize, at
least, the shadow of your own body!
Practical Notes
• Film Transport
You can operate the transport lever either it one
swing or in two short swings until it locks -
whichever you prefer.
• Is the Camera Loaded?
If you are not sure after a long interval, un fold
the rewind crank and try turning it gent ly in the
direction of the arrow. If you meet a
resistance you know that there is a film it the
camera. If the camera is empty, the cranlk turns
freely.
• Setting the Film Type Indicator
To keep a check on the type of film you have
in the Rollei 35 turn the black disc by it
notches and set the pointer to the film type
in use (black and white negative, colour nega tive fi
lm. artificial light colour film. daylight type col
or film.)
This manual owned and taken from www.butkus.
org/chinon