User manual

65
If you try to execute more than 10 consecutive stroboscopic flash light shots, the
flash can automatically stop in order to prevent overheating.
If this happens, please let the flash cool down for at least 15 minutes. Please use a
new battery or fully charged battery to operate this mode.
Select the flash mode
Press the [MODE] button until the LCD displays
[Multi].
Frequency setting
Press the [Parameter Settings button] until the LCD
flickers 100 Hz. Rotate the dial to increase (clock-
wise) or decrease (counterclockwise) the frequency.
The available flash frequency can be adjusted from
1 Hz – 199 Hz.
The number of flashes set
Press the [Parameter Settings button] until the LCD
shows 20. Rotate the dial to increase (clockwise) or
decrease (counterclockwise) the number of flashes.
The flashes can be set from 1 to 40. After completi-
on press the “Parameter Settings Button” to exit.
Exposure power setting
Rotate the dial to increase (clockwise) or decrease (counterclockwise) the power in
multi mode.
The relational table of flash power and number of flashes
Flash power 1/128 1/64 1/32 1/16 1/8 1/4
Number of flashes 1–40 1–20 1–12 1–8 1–4 1–2