User manual

A M M M M M M M M M M

Automatic 18 24 28 35 50 70 85 105 135 180

[ZOOM] Settings

Press the ‘ZOOM button’ until the number in the display begins to ﬂicker. Rotate the

dial to set the appropriate values. Dial clockwise to increase and counterclockwise

to decrease the zoom value. Press the „ZOOM button“ again to exit the setup state.

About Automatic Zoom A and

Manual Zoom M Settings:

Flash head automatically zoom: Rotate the dial to

adjust the ﬂash range. If „A“ is shown, the ﬂash

will automatically adjust the ﬂash coverage (boot

initialized to 35 mm). If the camera is mounted

and uses E-TTL or i-TTL system, the ﬂash bulb will

change as the lens zoom removes front and back

to adapt different ﬂash coverage.

Manually set zoom position: Rotate the dial to

adjust the ﬂash range. If „M“ is shown, you can

manually adjust the ﬂash coverage (18, 24, 28, 35,

50, 70, 85, 105, 135, 180).

• If zoom is adjusted manually, please ensure that the ﬂash coverage covers the

lens zoom, so that the picture will not show the edge of a shadow.