User manual

Note:

1. Pay attention to the difference between Canon MASTER interface and Nikon

main control interface. It corresponds only to the camera‘s online operations.

2. The Canon MASTER mode from the lamp mode is consistent with the MASTER

ﬂash. The Nikon MASTER mode from lamp mode needs to be set in each group,

independent of the main ﬂash.

3. Wireless off mode: normal TTL/M/Multi ﬂash mode

Wireless MASTER Flash Mode (MASTER Canon)

Wireless MASTER ﬂash mode (MASTER Canon) can be divided into:

1. Automatic wireless control mode (E-TTL Auto MASTER Canon)

2. Manual wireless control mode (Manual MASTER Canon )

3. Stroboscopic wireless control mode (Multi stroboscopic MASTER Canon)

Press the ‘Parameter Settings button’ for a long time until the LCD shows the Canon

MASTER mode ‘MASTER’.

Set the MASTER control unit wireless

channel: Press and hold the [Wireless Parameter

Settings button] to set the channel number (serial

number under the icon). Rotate the dial to set the

wireless channel from 1 ~ 4.

Wireless channel number