User manual
72
Set the MASTER control unit:
You can activate and deactivate the Master unit.
Set MASTER flash: Press the [Wireless Parameter
Settings button] until icon is flashing. Rotate
the dial to set the MASTER flash output mode.
If the icon
is shown MASTER flash is deacti-
vated. If the icon
is shown MASTER flash is
activated.
Note:
• The SLAVE flash should have the same setting as the MASTER unit if the Canon
flash is used as MASTER.
• The Canon Flash Unit needs to have the same group A power as the MASTER
model power.
• The MASTER mode supports high-speed synchronous but does not support rear
curtain sync.
Full Auto Wireless MASTER Unit
(E-TTL, MASTER Canon)
Press and hold the [Flash mode select button] on the MASTER flash. There you can
set the MASTER light as Auto E-TTL mode to Auto flash shooting.
MASTER switch symbol
ENGLISH