User manual

Note: If you have a Nikon MASTER unit you can

select all kind of SLAVE unit group mode and po-

wer. SLAVE group mode and parameter can be set

separately with the MASTER model and parameter.

Full Instruction MASTER Unit

(i-TTL Full Auto, MASTER, Nikon)/ Manual Instruction MASTER Unit

(M, manul, MASTER, Nikon)

If the MASTER unit is in TTL or M mode, you can use the SLAVE unit wireless ﬂash

OFF mode, TTL mode, M mode.

1. Press the [Parameter setting button] for a long

time, to set up the system Nikon MASTER unit

(MASTER Nikon).

2. Press the [Flash mode select button] shortly to

set up Full Auto i-TTL mode or manual mode on

the MASTER Flash Unit.

3. Wireless instruction ﬂash model

Group A: Press the [Wireless Parameter set-

ting button] to (A) so that the Group A model

power twinkles. Rotate the dial to change

group A model between wireless off, i-TTL and

M. If the setting is done, press the [Wireless

Parameter setting button] again to quit group A

setting and go into group B setting.

Group B: Press the [Wireless Parameter setting

button] to (B) so that the Group B model power

twinkles. Rotate the dial to change group B model between wireless off, i-TTL

and M. If the setting is done, press the [Wireless Parameter setting button] again

to quit group B setting and go into group C setting.

MASTER switch symbol