User manual

ENGLISH

Group C: Press the [Wireless Parameter setting

button] to (C) so that the Group C model power

twinkles. Rotate the dial to change group C

model between wireless off, i-TTL and M. If the

setting is done, press the [Wireless Parameter

setting button] to quit.

If the SLAVE ﬂash light group setting is done, it can be turned on or off. ON:

The wireless ﬂash model group number will be shown on the display. OFF: The

wireless group number won‘t be shown on the display.

4. SLAVE unit power setting

Press the [Parameter setting button] to <A> so that the group power twinkles (if

group A is in wireless mode). Rotate the dial to set the power. Afterwards press the

[Parameter setting button] to enter group setting.

Multi Command MASTER Mode

(Multi Command MASTER Nikon)

If the MASTER unit is in Multi mode, the SLAVE unit supports „Wireless ﬂash off

mode“ and „Multi mode“.

1. Press the [Parameter setting button] for a long

time to set up the Nikon MASTER unit (MASTER

Nikon).

2. Press shortly the [Mode ﬂash select button]

so set up the multi mode on the MASTER ﬂash

light.

3. SLAVE unit group mode setting.