User manual

ENGLISH

Multi Lighting Applications

1. Wireless optical instruction light

You can create two or three slave units to complete the multi - position shooting

requirement. And by the main TTL auto ﬂash shooting the ﬂash set the ﬂash ratio,

manual ﬂash output and strobe output.

(1)Flash light compose two slave unit group‘s wireless ﬂash.

Setting SLAVE unit: SLAVE c and SLAVE n.

Setting channel: 1, 2, 3, 4

Setting group: Two ﬂash lights setting group A, B

Setting MASTER unit: Setting each group ﬂash mode and output power

Setting ﬂash light ratio: Setting MASTER unit ﬂash light ratio A:B or A:B:C for shoo-

ting (for example: Canon instruction )

(2)Flash light compose three SLAVE unit group's wireless ﬂash

Setting SLAVE unit: SLAVE c and SLAVE n.

Setting channel: 1, 2, 3, 4

Setting group: Three ﬂash lights setting group A,B,C

Setting MASTER unit: Setting each group‘s ﬂash mode and output power

Setting ﬂash light ratio: MASTER unit ﬂash light ratio setting <A: B C>

(for example: Canon Instruction )

Press down the test button of the MASTER unit to test the ﬂash. If the SLAVE unit

doesn‘t ﬂash, please check the ﬂash light angle and the right distance.

Note: MASTER unit: If the ratio <RATIO A: B> is set, the ﬂashes of ratio C will

not ﬂash. If the group of three ﬂash light set <A>, they will be controlled by the

MASTER ﬂash light.