User manual

90
Use the Built-In Wide Angel Diffuser
This is used if you want to have a wider flash light (flare light).
1. Pull out wide diffusion plate
Slowly pull completely out the wide diffusion
plate.
2. Push the reflector plate
Then push the reflector plate back again into
the flash head.
Using the Diffuser:
Attach the diffuser on the Flash Unit. The light will
be softer which will help to get no shadow. This
can be used in landscape as well as portrait format.
The best effect can be achieved if the Flash Unit
head has a position of 60 degrees.
ENGLISH
Subject to technical changes »
Canon and Nikon are registered trademarks, Canon and Nikon products
are trademarks or registered trademarks of Canon and Nikon.