75° Ultrawide angle Dynamic HD recording Glass-lens 14.
Contents Precautions .......................................................................................................................................2 Preface ..............................................................................................................................................2 Warranty...........................................................................................................................................2 Overview.............................................
Precautions EN When using the Rollei 5S video camera, adhere to the following precautions: 1. Do not drop, knock or shake the video camera. 2. Do not put the video camera close to an object that generates strong magnetic field, such as a magnet or a motor. Do not put the video camera close to an object that emits powerful radio waves, for example, an antenna. Strong magnetic field may cause faults on the video camera or damage the image / voice data. 3.
Features The Rollei 5S video camera has the following features: Provides 175° ultra-wide-angel f/2.8 lens. Provides a special-purpose HD lens, which supports 1080P, 1080i, 960P, 720P and 480P video recording. Takes 16M pixels pictures in 4608 x 3456 resolution (interpolated). Performs 10X digital zooming. Performs shooting in multiple modes, such as single-key capturing, and automatically continuous capturing. Provides unique fast-shot feature, up to 10 photos per second.
Structure EN 1. TFT screen 3. Upward key 5. Downward key 7. OK key 9. Wrist strap hole 11. SD card slot 13. AV out/Audio in 15. Video/Audio indicator (Green) 17. Microphone 19. LCD segment screen 21. Stop key 23. Video/Photo indicator (Green) 25. HDMI output 27. Threaded interface 2. Menu key 4. Leftward key 6. Playback key 8. TFT screen lock knob 10. Buzzer 12. Rightward key 14. Record key 16. Power switch 18. Operating/Recharging indicator (Red) 20. Shutter key 22. Lens 24. Laser indicator 26.
(2). Put the Rollei 5S video camera into the waterproof housing EN video camera Waterproof Put the video camera into housing the waterproof housing ** To remove the TFT screen, press the PUSH snap button and then remove it.** 2. Installing the Remote Controller The Rollei 5S video camera is equipped with an independent remote controller, which can be placed at different positions, depending on the accessories. (1). Velcro (2). Back clip (3).
G EN TF card capacity indication: The ” “ (TF card capacity) icon is displayed in the bottom-right corner, indicating the available space of the TF card. The more bars the power indicator has, the more free space you have. If the TF card is full, the green indicator on the left side is constantly on.
Parameter Settings To set parameters, perform the following operations: − In the preview mode under power-on state, press the ”M” key to display the menu interface. − Press the “<” or “>” key to choose a left or right option from the menu interface. − Press the “+” or “–” key to choose an upper or lower option from the menu interface. − After selecting an option, press ”OK” to save settings. − Press the ”M” key again to save the setting and exit the interface.
EN If you set this parameter to “ON”, the video camera automatically records the date and time during video recording and displays them in the bottom-right corner of the screen. If you set this parameter to “OFF”, the video camera does not display the date and time during video recording. The display time function is unavailable for video recording 1080i, 960P/48f, 960P/50f, 480P/100f and 480P/120f modes. Note: a. In audio recording mode, press the “Video” key once to start audio recording.
Set system parameters a. Warning tone: Set this parameter to “ON” to enable the tick tone or “OFF” to mute the tick tone. EN Note: This parameter cannot be set to mute the prompt tones for audio recording shooting and video recording. Instead, this parameter can only be set to mute the tone generated upon pressing a key on the TFT screen and no-operation prompt tones. b.
Operations 1. Insert a Micro SD card into the Rollei 5S video camera Note: Use a branded Micro SD card. We recommend Class 10 memory cards. EN 2. Powering on the Rollei 5S Video camera Turn the power switch to the ON position to power on the Rollei 5S video camera. At this time, the red indicator is on, and the Rollei 5S video camera changes to the preview state. Note: a. If the battery power is low, the ” “ symbol is displayed on the TFT screen together with a promot. b.
You can set the resolution to any of the following three modes: 8M, with an image resolution of 3200 x 2400. EN 12M, with an image resolution of 3840 x 2880. 16M, with an image resolution of 4608 x 3456 (interpolated). Four photo shooting modes are available for the video camera. a. single shot (the default mode) In the preview state, press the “Photo” key once to take a picture while the system generates a click tone.
EN 6. Playing Back a File You can view the recorded audio/video and photo files on the Rollei 5S video camera. To view a file, perform the following operations: — Press the “ ”key to display the playback interface. Press the“ ”key again to exit the playback interface. — Select ” “(the video files interface) to view a recorded video file. Select ” “(the photo files interface) to view a photo file. Select ” “(the mixed file interface) to view all the video, audio, and photo files.
3) Playing an Audio File To play an audio file, perform the following operations: On the mixed file interface ( ), press the “>” or “<” key to display all the audio files in ” “ mode. Select the required file, and press “OK“ to play it. When playing an audio file, you can use the following keys: Key Description Key Description + Turns up the sound volume. – Turns down the sound volume. < No function is provided. > No function is provided.
EN 3) Automatically Playing a File In the photo file interface, the Rollei 5S video camera can automatically play photos in sequence every five seconds. To automatically play a file, perform the following operations: Enable the playback function, and press “OK”. 8. Using a Remote Controller The Rollei 5S video camera is equipped with a remote controller, which is used for control of video recording and shooting.
11. Connecting the HDMI Output In the preview state, connect the Rollei 5S video camera to an HD display device using an HDMI patch cord. After being connected to the HD display device, the Rollei 5S video camera can implement all its functions. Note: Incorrect removal of the HDMI patch cord may result in exceptions on the Rollei 5S video camera. After being restarted, the Rollei 5S video camera can restore to the normal state. 12.
Storage and Play of a File EN 1. Connecting a USB Data Cable After video recording is complete, you can copy the recorded images to a computer for play by using a USB data cable. You can also remove the Micro SD card from the Rollei 5S video camera and access the image data by using a sensor. The Media Player software is preferred for playing a file. Rollei 5S USB interface Computer USB interface USB data cable Note: a. Before removing the USB data cable, power off the Rollei 5S video camera. b.
Installation and Use of a Backup Battery (D23) 1. Installing a Battery You can install the D23 battery onto the Rollei 5S video camera without setting any parameters for power supply, as shown in the following figure: 2. Checking the Battery Power You can gently press the Power key to check the power of the backup battery. The LED indicator on the battery blinks for three seconds in different colors to show the current power.
Package List EN Rollei Bullet 5S telecamera TFT monitor Remote controller Dedicated waterproof housing Standard battery Flat-mounted assembly L-shaped helmet accessory Bicycle accessory Bracket Backup battery Micro SD card AV output cable USB cable Cloth bag strap CD ROM -18- Flat-surface accessory User’s Manual
Technical Specifications Technical specifications of the Rollei 5S video camera Option View angle Number of pixels Specifications Option 175° 14 million CMOS sensor (4384 x 3288) Battery 1000 mAh Li-battery + 1100 mAh backup battery Power consumption 750 mA @ 3.7 V (Max.) Format for video recording (in PAL system) Continuous duration 160 Minutes max.
Precautions for the Waterproof housing EN The waterproof housing is a precision component. When using the waterproof housing, adhere to the following precautions: 1. Do not randomly remove or change the O-ring, key, and lens cover. Otherwise, the waterproof performance deteriorates. 2. Do not put the waterproof housing in a place where corrosive gases are easily generated due to strong acid or alkali.