Instruction Manual

3.1.3 Emergency Recording

During Video Recording, press the

button to enter emergency recording

mode, the “Emergency” message will be

shown immediately on the upper left

corner of the screen, and the recorded

file will be protected.

To stop the recording, press the button.

Note:

1. If the Collision Detection function is enabled and a collision is

detected, the device will automatically trigger the emergency

recording.

2. If the Collision Detection function is enabled and a collision is

detected, the emergency recording function of the device will

automatically be triggered. The emergency recording file is created

as a new file, which will be protected to avoid being overwritten by

normal cycling recording. 4G memory card can save up to 5

emergency video files, and 8G (or above) memory card can save

up to 10 emergency video files. The alert message of “Emergency

files are full” will pop up on the screen when the emergency

recording files are full, and the oldest emergency file will be

automatically deleted when a new emergency recording file is

created.