Instruction Manual

3.1.5 Using the LED Light

You can use the LED light to provide extra light when the lighting is

insufficient.

To enable the LED light, do the following:

1. Press the button to enter the

OSD menu.

2. Press the / button to select

Auxiliary Light and press the

button.

3. Press the / button to select On

and press the button.

4. Press the button to exit the menu.

Note:

1. Turn off LED light when the battery is low.

2. When using LED light for a long time, it may become hot. Take care

not to touch the hot LED light.

3.1.6 Taking Snapshot

You can also use this device to take

snapshots of the current scene.

From the standby screen, press the

button to take a snapshot.

Note:

If recording is in progress, press the button to stop the recording

first.