Contents About this Guide ................................................................... 3 WEEE Notice........................................................................ 3 CE Regulatory Notice ........................................................... 3 Notes on Installation ............................................................. 4 Caution ................................................................................. 4 1 Introduction .....................................................
3.2 4 3.1.1 Record videos while driving ..........................14 3.1.2 Record all other types of videos ...................14 3.1.3 Emergency Recording ..................................15 3.1.4 The Recording Screen ..................................16 3.1.5 Taking Snapshot ...........................................17 Playback Videos and Photos ...................................18 3.2.1 Playing Videos ..............................................19 3.2.2 Viewing Photos ................
About this Guide The content in this document is for information purpose and is subject to change without prior notice. We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice.
Notes on Installation 1. 2. 3. 4. 5. Install the device near the rear-view mirror to obtain the best open-field view. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos or snapshots. Clean the lens on a regular basis. Do not install the device on a tinted window. Doing so may damage the tint film.
1 Introduction Thank you for purchasing this advanced Car Recorder. This device is specifically designed for real time video and audio recording when driving. 1.1 Features • • • • • • Full HD camera (1920x1080 @ 30fps) 2.4” LCD color screen Wide angle lens Motion detection Automatic Emergency recording for collision detection Supports SDHC up to 32GB 1.2 Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately.
1.3 Product Overview Front View Top and Bottom Views 8 9 1 2 10 11 Side (Left and Right) Views 12 7 Rear View 3 5 4 6 13 14 No. Item No.
1.4 Remote Control 3 1 2 4 5 No. Description 1 Press to take a Photo ( 2 Press to enter the menu or return to previous screen. Similar function as Back Button ( ). 3 Press to move up. Similar function as Up Button ( 4 Press to confirm selection. Similar function as Enter Button ( ). 5 Press to move down. Similar function as Down Button ( ). ). (Take snapshots during recording.) ).
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the device. Push the memory card until it clicks into place. To remove the memory card Push to eject the memory card out of the slot. Note: 1. Do not remove or insert the memory card when the device is turned on. This may damage the memory card. 2. Please use a Class 6 memory card with at least 8GB capacity. 3. Please format the Micro SD card before you start recording.
2.2 Installing in Vehicles 2.2.1 Mount to Windshield 1. Attach the bracket to the device. Slide it into the bracket holder until you hear a click. 2. With the suction-cup laying flat, position the suction-cup on the windshield. 3. the base firmly on the Hold windshield and press down the clamp to mount the car holder to the windshield. Make sure the base is securely locked in place.
2.2.2 Adjust the device position 1. Loose the knob to swivel the device vertically. Knob 2. Loose the knob to swivel the device horizontally up to 360°. Knob 3. 10 Then tighten the knob to make sure the device is securely locked in place.
2.3 Connecting to Power Use only the supplied car adapter to power up the device and charge the built-in battery. 1. Connect one end of the car adapter to the USB connector of the device. 2. Plug the other end of the car charger to the cigarette lighter socket of your vehicle. Once the vehicle engine is started, the device automatically turns on. Note: 1. The orange LED lights up while the battery is charging. 2.
2.4 Powering the Device On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the device automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the device turns on. See Set Automatic Recording (2.5.1). Once the vehicle engine shuts down, the device automatically saves the recording and turns off the power within 10 seconds. See Delay Shutdown (4.2). 2.4.
2.5 Initial Settings Before using the device, we recommend you to enable the Automatic Record function and set up the correct date and time. 2.5.1 Set Automatic Recording To enable the recording to start automatically after you turn on the power, do the following: 1. Press the button to enter the OSD menu. 2. Press the / button to select Automatic Record and press the button. 3. / Press the and press the 4. Press the BACK button to exit the menu. button to select On button. 2.5.
3 Using the Car Recorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the device automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. Or, press the button to stop recording manually. Note: On some cars, the recording will continue when the engine is switched off. If this happens, do one of the following: - Manually turn off the cigarette lighter.
3.1.3 Emergency Recording During Video Recording, press the button to enter emergency recording mode, the “Emergency” message will be shown immediately on the upper left corner of the screen, and the recorded file will be protected. To stop the recording, press the button. Note: 1. If the Collision Detection function is enabled and a collision is detected, the device will automatically trigger the emergency recording. 2.
3.1.4 The Recording Screen 5 6 7 1 2 8 3 4 9 No. Item 1 Duration 2 Date and time 3 Guide icon (Menu) Press the button to enter the OSD menu. 4 Guide icon (Playback) Press the button to switch to Playback mode. 5 Resolution Indicates the video resolution. 6 GPS icon When a GPS fix is established, the icon " show on the top-right corner of the screen. 7 Battery 8 Guide icon (Stop) 9 Guide icon (Emergency) 16 Description Indicates the recording duration.
The results of GPS positioning are only for reference, and should not affect the actual driving situation. The system also cannot ensure the positioning accuracy. GPS positioning accuracy may differ depending on weather and location such as high buildings, tunnels, undergrounds, or forests. GPS satellite signals cannot pass through solid materials (except glass). Tinted window will also affect the performance of the GPS satellite reception. GPS reception performance on each device may differ.
3.2 Playback Videos and Photos 1. If recording is in progress, press the recording. The standby screen is displayed. 2. Press the 3. Press the / button to select the file category that you want to browse and press the button. 4. Press the / button to view the next or the previous file and press the button to view the file in full screen. button to stop button to enter the OSD menu. Note: From the standby screen, you can directly enter Playback mode by pressing button.
3.2.1 Playing Videos To play videos, do the following: 1. If recording is in progress, press the recording. 2. Press the 3. Press the / button. 4. Press the press the 5. / button to browse Press the for the desired video file and press the button to play the video. 6. Press the button to pause the playback. Press it again to resume. button to stop button to enter the OSD menu. / button to select File Playback and press the button to select Video or Emergency and button. 3.2.
3.2.3 The Playback Screen Video Playback Screen Photo Playback Screen 7 7 1 6 2 No. 1 20 3 4 5 2 3 4 Description Item Date and time Indicates the recorded date and time. 2 Guide icon (Back) Press the display. button to return to file selection 3 Guide icon (Previous) Press the video/photo. button to view the previous 4 Guide icon (Next) Press the button to view the next video/photo. 5 Guide icon (Pause) Press the 6 Duration 7 Battery button to pause the video playback.
3.2.4 Deleting Files To delete file(s), do the following: 1. If recording is in progress, press the recording. 2. Press the 3. Press the / button to select File Deletion and press the button. 4. Press the / button to select the file category and press the button. 5. / button to select the Press the file that you want to delete and press the button to enter the Delete menu. 6. Press the Item Delete One Delete All 7. Press the button to stop button to enter the OSD menu.
4 Adjusting the Settings 4.1 Using the Menu You can customize the video recording and other general settings via the on-screen display (OSD) menus. 1. If recording is in progress, press the recording. button to stop 2. Press the 3. Press the / button to select a menu option and press the button to enter the selected menu. 4. Press the / button to select the desired setting and press the button to confirm the setting. 5. Press the 22 button to open the OSD menu. button to exit the menu.
4.2 Menu Tree Refer to the below table for details on menu items and available menu options. Menu option File Playback Description Select the file category that you want to view. Available option Video / Emergency / Picture Satellite Status Displays the current state of the satellite reception. Satellite Synchronization Automatically synchronize with the local satellite time. When this feature is enabled, the system will use the satellite time, and you cannot manually change the time.
Menu option Description Available option Enable / Disable the device to automatically record video after the device is turned on. On / Off Record Interval Set the recording duration for each recorded video file. 3 min. / 5 min. Motion Detection Enable/Disable the motion detection. If this function is enabled and the power off button is pressed, the system alert message, “Press OK Key to Power off, or enter motion detection after 10sec.”, will pop on the screen.
Menu option Description Available option and a warning message is displayed on the screen. Set the on-screen display menu language. English / German / French / Spanish / Italy / Portuguese / Polish / Czech / Dutch / Greece / Danish / Norwegian / Swedish / Hungarian File Deletion Delete the file(s). Video / Emergency / Picture TV standard Set the TV type based on your local region. NTSC / PAL Format Format the memory card. Yes / No Default Reset all settings to factory default settings.
5 Installing the Software 1. Place the attached CD ROM into the CD player. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be shown up. 3. Press the [Menu] item to start the installation process according to the instructions on-screen.
6 SuperCar 7 8 9 10 11 12 13 14 15 1 2 3 4 16 5 6 No. Item No. Item 1 Video Player 9 File Path 2 Play / Pause 10 Browser File 3 Previous 11 File List 4 Next 12 File Name 5 Stop 13 Volume 6 Google Map 14 Current Duration / Total Duration 7 Compass 15 Signal Noise Ratio (SNR) 8 Speed Meter 16 G-Sensor Note: 1. To display the route on Google Maps, please make sure the internet is connected before starting the video playback 2.
7 Specifications Item Description Image sensor 1/3” CMOS sensor Effective pixels 2304 (H) x 1536 (V) Storage media Support Micro SDHC up to 32GB (Suggest to use a Class 6 memory card with at least 8GB capacity) LCD display Lens Focus range Movie Clip 2.4” LCD color TFT (112K pixels) Wide Angle Fixed Focus lens F2.4, f=3.0mm 1.5m~Infinity Resolution: Full HD (1920 x 1080), 30fps HD (1280 x 720), 30fps Format: MOV Still image (Snapshot) Resolution: 3M (2304 x 1536) Format: DCF (JPEG, Exif: 2.
Item Battery Operating Temperature Description Built-in 470mAH Li-polymer rechargeable 0° ~ 50° C Operating Humidity 20 ~ 70% RH Storage Temperature -20° ~ 80° C Dimensions Weight 63 x 70 x 28.7 mm Approx.