Instruction Manual

15
3.1.3 Emergency Recording
During Video Recording, press the
button to enter emergency recording
mode, the “Emergency” message will be
shown immediately on the upper left
corner of the screen, and the recorded file
will be protected.
To stop the recording, press the
button.
Note:
1. If the Collision Detection function is enabled and a collision is
detected, the device will automatically trigger the emergency
recording.
2. If the Collision Detection function is enabled and a collision is
detected, the emergency recording function of the device will
automatically be triggered. The emergency recording file is created
as a new file, which will be protected to avoid being overwritten by
normal cycling recording. 4G memory card can save up to 5
emergency video files, and 8G (or above) memory card can save up
to 10 emergency video files. The alert message of “Emergency
files are full” will pop up on the screen when the emergency
recording files are full, and the oldest emergency file will be
automatically deleted when a new emergency recording file is
created.