Rollei d23 com Brief Instructions
BEFORE YOU START… Thank you for buying this Rollei digital camera. Please read these instructions carefully to fully understand the different features of your camera. This symbol confirms conformity of the camera with European Union regulations governing electrical equipment. CE stands for Conformité Européenne (European Conformity). Check whether the contents of your package is complete. Should this not be the case, consult your camera dealer or contact an authorized Customer Service Center.
DESCRIPTION OF PARTS Shutter release CAMERA BODY Control dial Data monitor Viewfinder window Flash* Lens* Self-timer lamp Flash ready lamp (orange) Flash sensor* Terminal cover Focus lamp ON/OFF switch (green) Strap eyelet Viewfinder eyepiece* MENU button ENTER button LCD screen* DISPLAY button Card slot * Do not touch! Four-way toggle 3
DESCRIPTION OF PARTS DESCRIPTION OF PARTS BOTTOM PLATE TERMINALS Battery-compartment cover Power supply Video out USB connector Tripod socket 1/4“ DATA MONITOR The diagram below shows all the data that can be displayed on the data monitor. Image size No. of images remaining*/ No card Flash mode Battery condition Self-timer * The number of images remaining can only be approximate because it varies with JPEG compression which is a function of subject characteristics.
INSTALLING THE DRIVER SOFTWARE Installing the driver software To install the drivers for Windows 98 / Windows 98 SE / Windows 2000 Prof. / Windows, proceed as follows: 1 Insert the installation CD-ROM into your CDROM drive. 2 Double-click on the Setup icon. 3 The Setup dialog box appears. Please wait. 4 When the “Welcome” dialog appears, click [Next]. 5 When the Software License Agreement box appears, read it carefully and decide what to do: [Back]: to preceding box. [Yes]: to accept.
INSTALLING THE DRIVER SOFTWARE 6 When the Start Copying Files box appears, select: [Next]: to start installation. [Back]: to go back to the previous dialog box. [Cancel]: to exit. 7 6 When the Setup Complete box appears, click [Finish] to complete installation.
INSTALLING THE DRIVER SOFTWARE The following steps apply equally to OS 8.6 and OS.9 1 Choose the appropriate driver for your system. 2 Start the installation program by doubleclicking. 3 When the Welcome box appears, click [Continue].
INSTALLING THE DRIVER SOFTWARE 4 To start installation, click [Install]. 5 Read the warnings, then click on [Continue]. If necessary, you may quit the program by clicking [Cancel]. 6 Installation has been completed successfully. 7 To initial the newly installed software, restart your computer (suggested) or click [Continue] if you wish to continue installing. Please take the detailed manual from the Acrobat Reader file on the software CD.