Operation Manual

20
This is how it works: This is how it looks:
Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel [phone], Fax [phone], eMail [e-mail]
This is what it‘s for:
Power supply
Using the optional
power-supply unit
The camera can be operated
on external power with the
aid of the optional power-
supply unit. This is advisable
for prolonged shooting
sessions to save battery
power. The power-supply
unit is particularly helpful
when the camera is linked
up with a PC.
Before changing over from
battery power to AC or vice
versa, make sure that your
camera is turned off. Never
change the power supply
with the camera switched
on!
Connect the plug to the
power-supply terminal of
the camera.
Plug the power-supply unit
into a wall outlet.
Note that the power-supply
unit will not recharge any
batteries in the camera. To
charge these, use a
commercial charger.
Even with the power-supply
unit, the camera will
automatically cut off (for
safety reasons) after 30
minutes of non-use.
To reactivate the camera,
simply press the power
switch.