Operation Manual
Troubleshooting
Problem Cause Remedy Page
21
24
34
Shutter does not
release.
Is there a CF card in the
camera?
If NO CARD appears on the
LCD screen and CF on the
data monitor, there is no CF
card loaded. Insert a card.
Green focus lamp blinks
slowly (about twice per
second), and PLAYBACK
blinks on screen.
Camera is reading data
from CF card. Wait until it
has nished and the focus
lamp as well as PLAY-
BACK stop blinking.
Flash picture comes
out underexposed.
Was your subject within
ash range?
Make sure your subject
is within range of the
built-in ash unit: 0.4 –
3 m.