Operation Manual

‐28‐
5.2Setting:TVout







To connect the Rollei DF‐S 100 SE to a TV, select the option "TV" and confirm with OK
button. Select the desired TV signal (PAL or NTSC) and press OK button again. The TV
Display will show the same screen as the Rollei DF‐S 100 SE and you
 can view, edit or
scanyourpicturesontheTVDisplay.
5.3Setting:Format







IftheinternalmemoryorSDcardrequirestobeformattedbythescanner,youcanenter
theformatmodebypressOKbutton.Thedefaultsettingissetto"cancelformat".Press
OKbuttonagaintocanceltheformatorselectconfirmicontoconfirmtheformatoption.

Note
If there is no SD card inside the device, the internal memory will be formatted. If a SD
cardisinsertedinthedevice,onlytheSDcardwillbeformatted.

OK
OK