Instruction manual

Introduction Getting Ready Taking Pictures Playback Set Up
GB-106
Viewing Still Images | Viewing Movies | [o] Viewing Images Automatically as a Slideshow (slideshow) | [O] Viewing Multiple Images | [INFORMATION] Viewing Image Information | [J]/[I] Erasing Unwanted
Images | [U] Protecting Images from Accidental Erasing (PROTECT) | [p] Adding Voice Messages to Still Images (POSTRECORDING) | [V] Resizing and Trimming Images (RESIZE) | [W] Rotating an Image |
[T] Using DPOF to specify print settings | [G] Printing by Connecting the Camera Directly to a Printer (PictBridge) | Connecting to a Windows PC | Connecting to a Macintosh
BACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
Erasing all the images (ERASE ALL)
You can use the procedure below to erase all the images recorded on a
memory card.
1 Set the mode select dial to "P" and turn
the camera on.
2 Press the MENU button K to display the menu icons.
3 Use the left l or right r button to select
[ERASE MULTIPLE] I and then press the
OK button E.
The multiple erase settings screen appears.
4 Press the up u or down d button to
select [ERASE ALL] and then press the
OK button E.
A message appears asking you to confirm that you want to erase the
images.
5 Press the up button u and select
[EXECUTE]. Then press the OK button E.
All the images are erased and the "NO IMAGE" message appears.
A Important
• You cannot erase protected images (Æ p.107).
• When you erase an image with a postrecorded voice message (Æ
p.110), the sound file
is also erased.
A Important
If there are images still shown after you use
[ERASE ALL], those images may be protected. To
forcibly erase all the images, format the memory
card. (Æ
"[FORMAT] Initializing Memory Cards" on
p.152)
ERASE MULTIPLE
ERASE MULTIPLE
SELECT AND ERASE
ERASE ALL
RETURN
EXECUTE
CANCEL
ERASE ALL?